UNA General Trading, Block C, Ajman Free Zone, 13th Floor Office # 1300978
Mineral soluble oil
Premium-performance lubricants for drilling, reaming and tapping
Chlorine-free lubricants for drilling, reaming and tapping
Water-based chlorine and sulphur-free lubricant for drilling, reaming and tapping
Lubricants for drilling, reaming, tapping and other metal working operations
Minimum quantity lubricants for metal processing
Cutting fluid for manual operations
What You Should Know about Metalworking fluid
Metalworking Fluids are very popular in workshops across the world. This fluid is used to lubricate and cool the tools, machines, and work pieces during the cutting and formation of the metal. A good quality metalworking fluid will help you to reduce corrosion and remove the swarf. Most of the metalworking fluid contains 10 to 30 types of substances, some of which are well-known allergens and irritants. So, you should take proper precautions while using Cutting fluid in your workstation.
Types of metalworking fluids
Depending on the types of ingredients, metalworking fluids can be divided into the following sections.
Non-water miscible oils
These metalworking fluids mainly contain a single base oil. That base oil can be ester oil, mineral oil, or synthetic oil. However, to increase the sustainability of this metalworking fluid, companies are using recycled oils in the past few years. These metalworking Fluids are not susceptible to microbial contamination. As a result, these fluids have a long service life.
Water miscible oil
These metalworking fluids are mixed with water before usage. The percentage of mixed water depends on the type of machining and the product. Having said that, you need to take the help of an emulsifier to combine the oil with water.
Synthetic and semisynthetic fluids
These kinds of metalworking fluids are water-miscible types. However, these metalworking fluids are free of oil and it does not require any help from the emulsifiers.
© Copyright by unadxb.com