Clean surface area of dirt, grease, oil, paint, or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.
Squeeze equal parts from each tube onto a disposable surface and mix thoroughly.
Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
Sets in 6 minutes. Cures in 1-3 hours. If temperature is below 40ºF, then set time is longer. Minimal pressure is required during setting. No clamping is required.
© Copyright by unadxb.com