Takayama 10W-40 Semi Synthetic Motor Oil

Pack Size : 1 L

Downloads

Share Product :

Description

TAKAYAMA Safetec SAE 10W-40 is an all-season, semi-synthetic multigrade motor oil formulated for gasoline and light-duty diesel passenger car engines, including turbocharged models. Blended from synthetic base components and modern anti-wear additives, it protects engines against sludge, oxidation, and wear across daily city driving and high-load conditions.

Application

• Passenger Cars & Light Commercial Vehicles. Suitable for naturally aspirated and turbocharged petrol and diesel engines specifying SAE 10W-40 with ACEA A3/B4 or API SN/SL/CF.
• DPF Restriction. Because ACEA A3/B4 is a full-SAPS formulation, do not use this oil in modern diesel engines equipped with Diesel Particulate Filters (DPF).

Direction to Use

• Verify Compatibility. Check your vehicle owner’s manual to confirm your engine requires SAE 10W-40 with API SN/SL/CF or ACEA A3/B4. • Warm & Drain. Run the engine for 3 to 5 minutes so the old oil flows easily, park on a flat surface, remove the top filler cap, and drain the old oil from the sump plug. • Change Filter & Refill. Install a new oil filter (lubricating its rubber gasket with a thin film of fresh oil), torque the drain plug, and pour Takayama 10W-40 up to the exact capacity listed in your manual. • Verify Level. Run the engine for 1 to 2 minutes, shut it off, wait 5 minutes, and verify the oil level on the dipstick while checking underneath for leaks.