Permatex Black Adhesive Sealant Silicone RTV 81173

For Assembly 1. Remove all previous material from mating surfaces. Permatex 2. For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex Brake and Parts Cleaner. 3. Cut nozzle to desired bead size, 1/16“ to 1/4“ in diameter. An 1/8” bead is usually sufficient for most applications. 4. Remove cap, puncture tube or cartridge seal and attach extension nozzle. 5. Apply a continuous and even bead of silicone to one surface. 6. Assemble parts immediately while silicone is still wet. Secure or tighten as required, avoiding excessive squeeze-out. 7. Re-torque will not be necessary after the product has cured 1. Allow excess material to extend beyond the extension nozzle to cure, sealing and protecting the remaining product from moisture. For reuse, simply remove the cured product from the tip. 2. Remove uncured product from parts and hand-tools with a dry cloth, if skinned over, break film with a dry cloth to remove as much as possible, and remove the remaining material with Permatex Gasket Remover (not on painted surfaces) as previously stated. 3. Clean hands with a dry cloth or Permatex Fast Orange hand cleaner.