Permatex 20353 Brake Part Lubricant

For assembly as Conditioner 1. For best results, the cut gasket and installation surfaces should be clean and dry. 2. Apply a continuous and even bead of silicone to one surface of the cut gasket, first tracing the internal areas of the cut gasket configuration, then all surrounding bolt holes. 3. Press the coated surface of the cut gasket to the assembly and repeat step 2 on the mating surface. 4. Assemble all parts immediately while silicone is still wet. 5. Finger tighten flange bolts until material begins to squeeze out around the flange. 6. Tighten to torque specifications after 1 hour. For assembly as Positioner 1. For best results, the cut gasket and installation surfaces should be clean and dry. 2. Apply a continuous and even bead of silicone to one surface, first tracing the internal areas of the cut gasket configuration, then all surrounding bolt holes. 3. Press the coated surface of the cut gasket to the assembly. 4. Assemble all parts immediately while silicone is still wet. 5. Finger tighten flange bolts until material begins to squeeze out around the flange. 6. Tighten to torque specifications after 1 hour. NOTE: Not recommended for use on head gasket or parts in contact with gasoline. For Cleanup 1. Remove uncured product from parts and hand-tools with Permatex® Fast Orange® Wipes or Fast Orange® Hand Cleaners. If skinned over, break film with a dry cloth to remove as much as possible. Remove the remaining material with Permatex® Safer Scraper. 2. Clean hands with a dry cloth or Permatex® Fast Orange Hand Cleaner.