Loctite 2701 ThreadLocker

• Clean Threads. Clean both male and female threads with a degreasing solvent and let them dry. Although LOCTITE 2701 tolerates minor oil films, clean surfaces ensure maximum strength. • Apply Adhesive. Avoid touching the nozzle tip directly to metal to prevent curing inside the bottle. For through-holes, apply several drops onto the bolt where the nut engages. For blind holes, apply several drops into the lower third of the internal threads. • Assemble & Cure. Thread and torque the fastener normally, then allow 10 to 25 minutes to fixture before handling. • Disassembly Note. Because this is a high-strength permanent threadlocker, removal requires localized heating to around 250°C while disassembling with hand tools.