Loctite 270

For Assembly 1. For best results, clean all surfaces (external and internal) with a LOCTITE cleaning solvent and allow to dry. 2. If the cure speed is too slow, use appropriate activator. Please see the Cure Speed vs. Activator graph for reference. Allow the activator to dry when needed. 3. To prevent the product from clogging in the nozzle, do not allow the tip to touch metal surfaces during application. 4. For Thru Holes, apply several drops of the product onto the bolt at the nut engagement area. 5. For Blind Holes, apply several drops of the product to the lower third of the internal threads in the blind hole, or the bottom of the blind hole. 6. For Sealing Applications, apply a 360° bead of product to the leading threads of the male fitting, leaving the first thread free. For bigger threads and voids, adjust product amount accordingly and apply a 360° bead of product on the female threads also. 7. Assemble and tighten as required. For Disassembly 1. Apply localized heat to nut or bolt to approximately 250°C. Disassemble while hot. Clean-up: 1. Cured product can be removed with a combination of soaking in a LOCTITE solvent and mechanical abrasion such as a wire brush.