3 OZ (SKU: 31314)
10.3 OZ (SKU: 31914)
For best results, clean and dry surface area
Apply even, continuous ¼ inch bead of Silicone to one surface area. Surround all bolt holes with Silicone.
Reconnect parts while Silicone is wet.
Hand tighten until Silicone begins to squeeze out.
Allow drying for 1 hour and then tighten an additional ½ turn.
Scrape or cut away excess cured sealant. Silicone will fully cure in 24 hours.
© Copyright by unadxb.com