Molyslip WRL-S10 18 kg

Application Steps Clean the rope: Remove old grease, dirt, and salt deposits using a wire brush. Dry the surface: Ensure the wire rope is fully dry before application. Apply the lubricant: Use a brush, swab, gloved hand, or specialized mechanical applicator. Cycle the rope: Run the wire rope over sheaves to work the lubricant into the core. Application Tips Do not overapply: Excess grease attracts dirt and causes unnecessary fling-off. Watch the temperature: Apply at ambient temperatures between -10°C and 40°C for best penetration. Frequency: Reapply based on operating environment severity and visual inspection results.