Permatex High Strength Removable Threadlocker Orange Gel 25005

For assembly 1. Clean all threads (bolt and hole) with a cleaning solvent such as Permatex Brake and Parts Cleaner and allow to dry. 2. Remove the translucent protective cap by pulling off at an angle. 3. For Gel Twist turn the dial on the bottom of the container until 1/8” to 1/4″ (3mm to 6mm) of material protrudes from the top of the application tip. Note: First time use may require 4 to 5 full turns of the dial before material appears in the tip. For Gel Squeeze, remove cap and squeeze 1/8 to 1/4″m (3mm to 6mm) of material beyond tip. 4. Apply threadlocker to the engagement area of the male fitting (usually the leading 5 to 6 threads). 5. Assemble parts and tighten to recommended torque. 6. If unused gel contacts metal threads, do not retract threadlocker back into the tube. Wipe off with a clean towel. 7. Replace protective cap.