JB Weld 32929 Ultimate Black RTV Silicone Gasket Maker and Sealant

Prepare: For best results, clean and dry the surface area thoroughly, ensuring it is free of oil or debris. Apply: Apply an even, continuous 1/4-inch bead of the silicone to one surface area. Make sure to surround all bolt holes with silicone. Avoid using excessive material, as a little goes a long way. Assemble: Reconnect the parts immediately while the silicone is still wet. Secure: Hand tighten the assembly until the silicone begins to squeeze out. Dry: Allow the seal to dry for approximately 1 hour, then tighten an additional 1/2 turn. Finish: Scrape or cut away any excess cured sealant. The silicone will achieve a full cure in 24 hours under normal conditions.