Permatex 80050 Clear RTV Silicone Adhesive Sealant

1. Remove all previous material from mating surfaces. Permatex Gasket Remover is recommended for most materials, not for plastics or painted surfaces. 2. For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex Brake and Parts Cleaner. 3. Cut nozzle to desired bead size, 1/16“ to 1/4“ in diameter. A 1/8” bead is usually sufficient for most applications. 4. Remove cap, puncture tube or cartridge seal and attach extension nozzle. 5. Apply a continuous and even bead of silicone to one surface. 6. Assemble parts immediately while silicone is still wet. Secure or tighten as required, avoiding excessive squeeze-out. 7. Pressure should be applied to parts for 24 hours until the silicone is fully cured.