Permatex 59235 High Temperature Thread Sealant

1.For best performance, surfaces should be clean and free of grease. 2.Product should be applied to the thread engagement area in sufficient quantity to fill all engaged threads. 3.Use accepted trade practices to assemble and wrench-tighten fittings until proper alignment is obtained. 4.Very large thread sizes may create large gaps, which will affect cure speed and strength. 5.For maximum pressure and solvent resistance, allow at least 24 hours for the product to fully cure before filling and pressurizing system. 6.Fittings assembled with Permatex High Temperature Thread Sealant may be disassembled with normal hand tools. 7.For large pipe diameters (over 1″), heat may be required to disassemble fittings. 8.Fittings may be reused by removing loose sealant residue with a wire brush and reapplying sealant.