Devcon Plastic Steel Epoxy

SURFACE PREPARATION: Protect work area from accidental spills. Slightly roughen repair area. Clean surface by solvent-wiping to remove grease, oil, dirt or other contaminants. REMOVAL METHODS: (test inconspicuous area of item to be sure chemicals do not harm surface) Before epoxy is allowed to dry, remove excess immediately with damp cloth. Can also use mineral spirits or isopropyl alcohol. After cure: Metal/Ceramic/Glass: Heat in excess of 350ºF, this will weaken the bond. Solvents that can be used: isopropyl alcohol, acetone, methylene chloride or other solvent. For thick applications, drill holes to weaken the repair, then chisel from surface. Fabric: Before epoxy cures, immediately flush fabric with warm water or wipe with a damp cloth. Once epoxy is cured, it is not possible to remove it from the fabric. Wood: Sand the cured material from the wood.